找回密码
 立即注册

QQ登录

只需一步,快速开始

广告载入中...
查看: 39393|回复: 1859

黄金长阴短柱,其后黄金无数

   火... [复制链接]
头像被屏蔽
发表于 2018-3-1 21:34 | 显示全部楼层 |阅读模式

马上注册,享用更多功能,让你轻松玩转本论坛。

您需要 登录 才可以下载或查看,没有账号?立即注册

×
本帖最后由 小鲁157 于 2018-3-1 22:28 编辑

    风险总是涨出来的,大风险一定隐藏在众人的狂热里。反之亦然:机会总是跌出来的,大机会往往孕育在众人的绝望中。
    这就是股市辩证法。
    高手常常在别人狂热中冷静地出场,而在别人的绝望中抓住机会。
    那么,怎样才能在众人的绝望中发现机会呢?
    分享一个小技巧:那就是寻找连续下跌后的长阴短柱,特别是确认为真底的长阴短柱。
    仔细观察下面几个图,特别是黄色三角前后的量价关系,你一定会发现其中的规律,黄三角之前彗华量中柱顶有绿三角的量柱多为短柱,它所对应的价柱多为长阴,这个组合我们称之为黄金长阴。
    具体特征如下:   
    1、必须是连续下跌,四日内最少有三阴,末一或末二柱为长阴短柱;
    2、次日高开收阳过半阴、高开量价双胜阴,或长阳矮柱;
    3、次日缩量收阴但是不破长阴短柱底,第三日收阳盖阴,或过长阴短柱中线。
    符合上述三个条件的黄金长阴,其后多数有很好的机会。


本帖被以下淘专辑推荐:

发表于 2018-4-24 00:46 | 显示全部楼层
当前公式 : HJDY (条件选股公式)  
错误句 :
PLZ:=BETWEEN(V,REF(V,1)*0.95,REF(V,1)*1.05) OR BETWEEN(V,REFX(V,1)*0.95,REFX(V,1)*1.05) OR
     (BETWEEN(V,REF(V,2)*0.95,REF(V,2)*1.05) AND V>REF(V,1)*1.2) OR
     (BETWEEN(V,REF(V,3)*0.95,REF(V,3)*1.05) AND V>REF(MA(V,2),1)*1.2 AND V>REF(HHV(V,2),1)) OR
     (BETWEEN(V,REF(V,4)*0.95,REF(V,4)*1.05) AND V>REF(MA(V,3),1)*1.2 AND V>REF(HHV(V,3),1)) OR
     (BETWEEN(V,REF(V,5)*0.95,REF(搬详细信息 : 单语句函数嵌套层次太多!建议分多条语句编写
错误起始位置 : 969 ; 长度: 7
YINSHENG:=(YIN AND C<=REF(DI,BARSLAST(YANG)) AND V>REF(V,BARSLAST(YANG)));
LIANGJIABI:=V/C;
MALIANGJIABI:=MA(LIANGJIABI,3);
LIANGJIABIXISHU:=1.5;
BLZ:=V>REF(V,1)*1.5;
PLZ:=BETWEEN(V,REF(V,1)*0.95,REF(V,1)*1.05) OR BETWEEN(V,REFX(V,1)*0.95,REFX(V,1)*1.05) OR
     (BETWEEN(V,REF(V,2)*0.95,REF(V,2)*1.05) AND V>REF(V,1)*1.2) OR
     (BETWEEN(V,REF(V,3)*0.95,REF(V,3)*1.05) AND V>REF(MA(V,2),1)*1.2 AND V>REF(HHV(V,2),1)) OR
     (BETWEEN(V,REF(V,4)*0.95,REF(V,4)*1.05) AND V>REF(MA(V,3),1)*1.2 AND V>REF(HHV(V,3),1)) OR
     (BETWEEN(V,REF(V,5)*0.95,REF(V,5)*1.05) AND V>REF(MA(V,4),1)*1.2 AND V>REF(HHV(V,4),1)) OR
     (BETWEEN(V,REF(V,6)*0.95,REF(V,6)*1.05) AND V>REF(MA(V,5),1)*1.2 AND V>REF(HHV(V,5),1)) OR
     (BETWEEN(V,REF(V,7)*0.95,REF(V,7)*1.05) AND V>REF(MA(V,6),1)*1.2 AND V>REF(HHV(V,6),1)) OR
     (BETWEEN(V,REF(V,8)*0.95,REF(V,8)*1.05) AND V>REF(MA(V,7),1)*1.2 AND V>REF(HHV(V,7),1)) OR
     (BETWEEN(V,REF(V,9)*0.95,REF(V,9)*1.05) AND V>REF(MA(V,8),1)*1.2 AND V>REF(HHV(V,8),1)) OR
     (BETWEEN(V,REF(V,10)*0.95,REF(V,10)*1.05) AND V>REF(MA(V,9),1)*1.2 AND V>REF(HHV(V,9),1)) OR
     (BETWEEN(V,REF(V,11)*0.95,REF(V,11)*1.05) AND V>REF(MA(V,10),1)*1.2 AND V>REF(HHV(V,10),1)) OR
     (BETWEEN(V,REF(V,12)*0.95,REF(V,12)*1.05) AND V>REF(MA(V,11),1)*1.2 AND V>REF(HHV(V,11),1));
GLZ:=V=HHV(V,3) AND V=REFX(HHV(V,3),2);
TLZ:=(V*1.1<REFX(V,1) AND REFX(V,1)*1.1<REFX(V,2)) OR (V>REF(V,1)*1.1 AND V*1.1<REFX(V,1)) OR (V>REF(V,1)*1.1 AND REF(V,1)>REF(V,2)*1.1);
JSLS:=C<=REFX(C,1) AND REFX(C,1)<=REFX(C,2) AND LIANGJIABI>REFX(LIANGJIABI,1) AND REFX(LIANGJIABI,1)>REFX(LIANGJIABI,2);
JZ:=BLZ OR GLZ OR PLZ OR TLZ;
JJZ:=CURRBARSCOUNT>=4 AND YANG AND (YANGSHENG) AND JZ AND REFX(LLV(DI,3),3)>=DI AND (REFX(MA(LIANGJIABI,3),3)<=LIANGJIABIXISHU*LIANGJIABI OR REFX(JSLS,1)) AND REFX(C,3)>=DING;
HJZ1:=JJZ AND REFX(MA(C,3),3)>=DING AND REFX(MA(LIANGJIABI,3),3)<=LIANGJIABI AND REFX(YANG,3);
HJZ2:=YANG AND YANGSHENG AND JZ AND REFX(DI,1)>=DI AND REFX(JJZ,2) AND REFX(C,2)>DING AND REFX(LIANGJIABI,1)<LIANGJIABI;
HJZ3:=YANG AND YANGSHENG AND JZ AND REFX(LLV(DI,2),2)>=DI AND REFX(JJZ,3) AND REFX(C,3)>DING AND REFX(MA(LIANGJIABI,2),2)<LIANGJIABI;
HJZ4:=JJZ AND REFX(LLV(DI,3),3)>=DING AND REFX(MA(LIANGJIABI,3),3)<=LIANGJIABI AND REFX(YANG,3) AND (REFX(YANG,1) OR REFX(YANG,2));
WP:=JJZ OR HJZ1 OR HJZ4 OR HJZ2 OR HJZ3;
CONDJJZ:=JJZ AND REF(NOT(WP),1);
CONDHJZ1:=(HJZ1 OR HJZ2 OR HJZ3) AND REF(NOT(WP),1);
A:=CONDJJZ OR CONDHJZ1;
LZT:=BARSLAST(A);
LZTJ:=LZT<=10 AND LZT>=5;
JTJ:=C>REF(L,LZT);
JXL:=V<=LLV(V,LZT);
LTJ:=V<LLV(V,LZT)*1.1;
ZF:=(C-REF(C,1))*100/REF(C,1);
ZFTJ:=ABS(ZF)<1;
V2T:=V/REF(V,1);
JDLS:=ZF<=0 AND V2T<1;
LSTJ:=COUNT(JDLS,LZT)>=2;
{LTJ:=V2T<0.8;}
AZMD:JTJ AND LTJ AND LZTJ AND LSTJ AND ZFTJ;
STICKLINE(AZMD,0,100,3,0),COLORRED;
回复

使用道具 举报

发表于 2022-1-12 14:12 | 显示全部楼层
老宋666 发表于 2018-7-23 05:59
DING:=MAX(O,C);{实顶}
DI:=MIN(O,C);{实底}
YANG:=(DI>=REF(DING,1)) OR (C>O AND NOT(DINGREF(C,1) AND ...

DING:=MAX(O,C);{实顶}
DI:=MIN(O,C);{实底}
YANG:=(DI>=REF(DING,1)) OR (C>O AND NOT(DING<=REF(DI,1))) OR (C>REF(C,1) AND C=O) OR (C=REF(C,1) AND C=O AND REF(DING,1)=C);{阳线}
YIN:=NOT(YANG);
YANGSHENG:=YANG AND C>=REF(DING,BARSLAST(YIN)) AND (V>REF(V,BARSLAST(YIN)) OR (BETWEEN(V,REF(V,BARSLAST(YIN))*0.95,REF(V,BARSLAST(YIN))*1.05)));
YINSHENG:=(YIN AND C<=REF(DI,BARSLAST(YANG)) AND V>REF(V,BARSLAST(YANG)));
LIANGJIABI:=V/C;
MALIANGJIABI:=MA(LIANGJIABI,3);
LIANGJIABIXISHU:=1.5;
BLZ:=V>REF(V,1)*1.5;
PLZ:=BETWEEN(V,REF(V,1)*0.95,REF(V,1)*1.05) OR BETWEEN(V,REFX(V,1)*0.95,REFX(V,1)*1.05) OR
     (BETWEEN(V,REF(V,2)*0.95,REF(V,2)*1.05) AND V>REF(V,1)*1.2) OR
     (BETWEEN(V,REF(V,3)*0.95,REF(V,3)*1.05) AND V>REF(MA(V,2),1)*1.2 AND V>REF(HHV(V,2),1)) OR
     (BETWEEN(V,REF(V,4)*0.95,REF(V,4)*1.05) AND V>REF(MA(V,3),1)*1.2 AND V>REF(HHV(V,3),1)) OR
     (BETWEEN(V,REF(V,5)*0.95,REF(V,5)*1.05) AND V>REF(MA(V,4),1)*1.2 AND V>REF(HHV(V,4),1)) OR
     (BETWEEN(V,REF(V,6)*0.95,REF(V,6)*1.05) AND V>REF(MA(V,5),1)*1.2 AND V>REF(HHV(V,5),1)) OR
     (BETWEEN(V,REF(V,7)*0.95,REF(V,7)*1.05) AND V>REF(MA(V,6),1)*1.2 AND V>REF(HHV(V,6),1)) OR
     (BETWEEN(V,REF(V,8)*0.95,REF(V,8)*1.05) AND V>REF(MA(V,7),1)*1.2 AND V>REF(HHV(V,7),1)) OR
     (BETWEEN(V,REF(V,9)*0.95,REF(V,9)*1.05) AND V>REF(MA(V,8),1)*1.2 AND V>REF(HHV(V,8),1)) OR
     (BETWEEN(V,REF(V,10)*0.95,REF(V,10)*1.05) AND V>REF(MA(V,9),1)*1.2 AND V>REF(HHV(V,9),1)) OR
     (BETWEEN(V,REF(V,11)*0.95,REF(V,11)*1.05) AND V>REF(MA(V,10),1)*1.2 AND V>REF(HHV(V,10),1)) OR
     (BETWEEN(V,REF(V,12)*0.95,REF(V,12)*1.05) AND V>REF(MA(V,11),1)*1.2 AND V>REF(HHV(V,11),1));
GLZ:=V=HHV(V,3) AND V=REFX(HHV(V,3),2);
TLZ:=(V*1.1<REFX(V,1) AND REFX(V,1)*1.1<REFX(V,2)) OR (V>REF(V,1)*1.1 AND V*1.1<REFX(V,1)) OR (V>REF(V,1)*1.1 AND REF(V,1)>REF(V,2)*1.1);
JSLS:=C<=REFX(C,1) AND REFX(C,1)<=REFX(C,2) AND LIANGJIABI>REFX(LIANGJIABI,1) AND REFX(LIANGJIABI,1)>REFX(LIANGJIABI,2);
JZ:=BLZ OR GLZ OR PLZ OR TLZ;
JJZ:=CURRBARSCOUNT>=4 AND YANG AND (YANGSHENG) AND JZ AND REFX(LLV(DI,3),3)>=DI AND (REFX(MA(LIANGJIABI,3),3)<=LIANGJIABIXISHU*LIANGJIABI OR REFX(JSLS,1)) AND REFX(C,3)>=DING;
HJZ1:=JJZ AND REFX(MA(C,3),3)>=DING AND REFX(MA(LIANGJIABI,3),3)<=LIANGJIABI AND REFX(YANG,3);
HJZ2:=YANG AND YANGSHENG AND JZ AND REFX(DI,1)>=DI AND REFX(JJZ,2) AND REFX(C,2)>DING AND REFX(LIANGJIABI,1)<LIANGJIABI;
HJZ3:=YANG AND YANGSHENG AND JZ AND REFX(LLV(DI,2),2)>=DI AND REFX(JJZ,3) AND REFX(C,3)>DING AND REFX(MA(LIANGJIABI,2),2)<LIANGJIABI;
HJZ4:=JJZ AND REFX(LLV(DI,3),3)>=DING AND REFX(MA(LIANGJIABI,3),3)<=LIANGJIABI AND REFX(YANG,3) AND (REFX(YANG,1) OR REFX(YANG,2));
WP:=JJZ OR HJZ1 OR HJZ4 OR HJZ2 OR HJZ3;
CONDJJZ:=JJZ AND REF(NOT(WP),1);
CONDHJZ1:=(HJZ1 OR HJZ2 OR HJZ3) AND REF(NOT(WP),1);
A:=CONDJJZ OR CONDHJZ1;
LZT:=BARSLAST(A);
LZTJ:=LZT<=10 AND LZT>=5;
JTJ:=C>REF(L,LZT);
JXL:=V<=LLV(V,LZT);
LTJ:=V<LLV(V,LZT)*1.1;
ZF:=(C-REF(C,1))*100/REF(C,1);
ZFTJ:=ABS(ZF)<1;
V2T:=V/REF(V,1);
JDLS:=ZF<=0 AND V2T<1;
LSTJ:=COUNT(JDLS,LZT)>=2;
{LTJ:=V2T<0.8;}
AZMD:JTJ AND LTJ AND LZTJ AND LSTJ AND ZFTJ;
STICKLINE(AZMD,0,100,3,0),COLORRED;
回复

使用道具 举报

发表于 2018-7-23 05:59 | 显示全部楼层
DING:=MAX(O,C);{实顶}
DI:=MIN(O,C);{实底}
YANG:=(DI>=REF(DING,1)) OR (C>O AND NOT(DING<=REF(DI,1))) OR (C>REF(C,1) AND C=O) OR (C=REF(C,1) AND C=O AND REF(DING,1)=C);{阳线}
YIN:=NOT(YANG);
YANGSHENG:=YANG AND C>=REF(DING,BARSLAST(YIN)) AND (V>REF(V,BARSLAST(YIN)) OR (BETWEEN(V,REF(V,BARSLAST(YIN))*0.95,REF(V,BARSLAST(YIN))*1.05)));
YINSHENG:=(YIN AND C<=REF(DI,BARSLAST(YANG)) AND V>REF(V,BARSLAST(YANG)));
LIANGJIABI:=V/C;
MALIANGJIABI:=MA(LIANGJIABI,3);
LIANGJIABIXISHU:=1.5;
BLZ:=V>REF(V,1)*1.5;
PLZ:=BETWEEN(V,REF(V,1)*0.95,REF(V,1)*1.05) OR BETWEEN(V,REFX(V,1)*0.95,REFX(V,1)*1.05) OR
     (BETWEEN(V,REF(V,2)*0.95,REF(V,2)*1.05) AND V>REF(V,1)*1.2) OR
     (BETWEEN(V,REF(V,3)*0.95,REF(V,3)*1.05) AND V>REF(MA(V,2),1)*1.2 AND V>REF(HHV(V,2),1)) OR
     (BETWEEN(V,REF(V,4)*0.95,REF(V,4)*1.05) AND V>REF(MA(V,3),1)*1.2 AND V>REF(HHV(V,3),1)) OR
     (BETWEEN(V,REF(V,5)*0.95,REF(V,5)*1.05) AND V>REF(MA(V,4),1)*1.2 AND V>REF(HHV(V,4),1)) OR
     (BETWEEN(V,REF(V,6)*0.95,REF(V,6)*1.05) AND V>REF(MA(V,5),1)*1.2 AND V>REF(HHV(V,5),1)) OR
     (BETWEEN(V,REF(V,7)*0.95,REF(V,7)*1.05) AND V>REF(MA(V,6),1)*1.2 AND V>REF(HHV(V,6),1)) OR
     (BETWEEN(V,REF(V,8)*0.95,REF(V,8)*1.05) AND V>REF(MA(V,7),1)*1.2 AND V>REF(HHV(V,7),1)) OR
     (BETWEEN(V,REF(V,9)*0.95,REF(V,9)*1.05) AND V>REF(MA(V,8),1)*1.2 AND V>REF(HHV(V,8),1)) OR
     (BETWEEN(V,REF(V,10)*0.95,REF(V,10)*1.05) AND V>REF(MA(V,9),1)*1.2 AND V>REF(HHV(V,9),1)) OR
     (BETWEEN(V,REF(V,11)*0.95,REF(V,11)*1.05) AND V>REF(MA(V,10),1)*1.2 AND V>REF(HHV(V,10),1)) OR
     (BETWEEN(V,REF(V,12)*0.95,REF(V,12)*1.05) AND V>REF(MA(V,11),1)*1.2 AND V>REF(HHV(V,11),1));
GLZ:=V=HHV(V,3) AND V=REFX(HHV(V,3),2);
TLZ:=(V*1.1<REFX(V,1) AND REFX(V,1)*1.1<REFX(V,2)) OR (V>REF(V,1)*1.1 AND V*1.1<REFX(V,1)) OR (V>REF(V,1)*1.1 AND REF(V,1)>REF(V,2)*1.1);
JSLS:=C<=REFX(C,1) AND REFX(C,1)<=REFX(C,2) AND LIANGJIABI>REFX(LIANGJIABI,1) AND REFX(LIANGJIABI,1)>REFX(LIANGJIABI,2);
JZ:=BLZ OR GLZ OR PLZ OR TLZ;
JJZ:=CURRBARSCOUNT>=4 AND YANG AND (YANGSHENG) AND JZ AND REFX(LLV(DI,3),3)>=DI AND (REFX(MA(LIANGJIABI,3),3)<=LIANGJIABIXISHU*LIANGJIABI OR REFX(JSLS,1)) AND REFX(C,3)>=DING;
HJZ1:=JJZ AND REFX(MA(C,3),3)>=DING AND REFX(MA(LIANGJIABI,3),3)<=LIANGJIABI AND REFX(YANG,3);
HJZ2:=YANG AND YANGSHENG AND JZ AND REFX(DI,1)>=DI AND REFX(JJZ,2) AND REFX(C,2)>DING AND REFX(LIANGJIABI,1)<LIANGJIABI;
HJZ3:=YANG AND YANGSHENG AND JZ AND REFX(LLV(DI,2),2)>=DI AND REFX(JJZ,3) AND REFX(C,3)>DING AND REFX(MA(LIANGJIABI,2),2)<LIANGJIABI;
HJZ4:=JJZ AND REFX(LLV(DI,3),3)>=DING AND REFX(MA(LIANGJIABI,3),3)<=LIANGJIABI AND REFX(YANG,3) AND (REFX(YANG,1) OR REFX(YANG,2));
WP:=JJZ OR HJZ1 OR HJZ4 OR HJZ2 OR HJZ3;
CONDJJZ:=JJZ AND REF(NOT(WP),1);
CONDHJZ1:=(HJZ1 OR HJZ2 OR HJZ3) AND REF(NOT(WP),1);
A:=CONDJJZ OR CONDHJZ1;
LZT:=BARSLAST(A);
LZTJ:=LZT<=10 AND LZT>=5;
JTJ:=C>REF(L,LZT);
JXL:=V<=LLV(V,LZT);
LTJ:=V<LLV(V,LZT)*1.1;
ZF:=(C-REF(C,1))*100/REF(C,1);
ZFTJ:=ABS(ZF)<1;
V2T:=V/REF(V,1);
JDLS:=ZF<=0 AND V2T<1;
LSTJ:=COUNT(JDLS,LZT)>=2;
{LTJ:=V2T<0.8;}
AZMD:JTJ AND LTJ AND LZTJ AND LSTJ AND ZFTJ;
STICKLINE(AZMD,0,100,3,0),COLORRED;
回复
回复

使用道具 举报

发表于 2018-3-1 22:42 | 显示全部楼层
阴元帅出场好戏开场了
回复

使用道具 举报

发表于 2018-3-1 22:48 | 显示全部楼层
黄金长阴短柱,其后黄金无数
回复

使用道具 举报

发表于 2018-3-1 23:01 | 显示全部楼层
符合上述三个条件的黄金长阴,其后多数有很好的机会
回复

使用道具 举报

发表于 2018-3-1 23:29 | 显示全部楼层
又有新的选股公式了吗
回复

使用道具 举报

发表于 2018-3-1 23:44 | 显示全部楼层
谢谢分享,楼主辛苦了,新年快乐!!!
回复

使用道具 举报

发表于 2018-3-1 23:49 | 显示全部楼层
谢谢分享,楼主辛苦了,新年快乐!!!
回复

使用道具 举报

发表于 2018-3-2 00:32 | 显示全部楼层
本帖最后由 神枪猎手 于 2018-3-2 00:34 编辑

谢谢楼主分享,指标在哪里?
回复

使用道具 举报

发表于 2018-3-2 01:03 | 显示全部楼层
量价组合底分型,谢谢分享!
回复

使用道具 举报

发表于 2018-3-2 01:06 | 显示全部楼层
谢谢分享,及时、实在的知识!
回复

使用道具 举报

发表于 2018-3-2 02:46 | 显示全部楼层
楼主辛苦,谢谢楼主
回复

使用道具 举报

发表于 2018-3-2 07:21 | 显示全部楼层
谢谢楼主分享
回复

使用道具 举报

发表于 2018-3-2 07:22 | 显示全部楼层
谢谢楼主分享
回复

使用道具 举报

发表于 2018-3-2 08:29 | 显示全部楼层
谢谢楼主分享
回复

使用道具 举报

发表于 2018-3-2 08:40 | 显示全部楼层
出现黄金长阴短柱,后面将有黄金万两
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|股海明灯官网 ( 京ICP备18020431号 )

GMT+8, 2024-11-22 15:53 , Processed in 0.123775 second(s), Total 14, Slave 13 queries , Gzip On, MemCached On.

Powered by Discuz! X3.5

Copyright © 2001-2024 Tencent Cloud.

快速回复 返回顶部 返回列表